REMOTE TRANSMITTER SSIQ 5W 6 CIRC ETH MAG MOUNT ANTENNA ›

Product Specs

The wireless activation and time signal are transmitted from a SiteSync IQ System Controller (located high in the building for best signal coverage) to the Wireless Controller, which controls the wired clocks and bells/tones. The clock relays run one clock system (clock code 1 only) using one circuit for operation and one circuit for correction. This product is intended for use with a SiteSync IQ® Wireless Clock System.

• Control up to four circuits at up to 10 amps each (resistive)
• Clock circuits provide hourly and 12 hour correction to one wired clock system
• Bell/tone circuits feature wireless or manual activation
• Dimensions: 81/2″h x 101/8″w x 5″d
• Weight:4 lbs.
• Power: 120vac hardwired
• Operating temperature: 41° to 131° F
• Humidity: 0% – 95% Non-condensing
• Dry contacts: 10A 240v (resistive)
• Receiver frequency: 450-470 MHz (factory set)
• Paging format: POCSAG, Narrow band
• Data baud rate: 512 BPS
• Receiver sensitivity: 10uV/M
• Channel spacing: 12.5 KHz
• Warranty: 5 years
• This device is compatible with the following clocks:
• American Time *B & A* Series
  • Cincinnati *D10 & *D12 Series
  • Dukane 24SS* Series
  • Edwards *010 & *012 Series
  • Faraday 23770, 2372, 2380 & 2382* Series
  • Simplex 77*, 82*, 2310-92* & 6310-92* Series